CET CODE: LIET

      Participated in Two Day National Workshop on “ Advances in Manufacturing Process”  conducted by the Department of Mechanical Engineering, University college of Engineering, Vizianagaram, Jawaharlal Nehru Technological University, Visakhapatnam on 28^th February & 1^st March 2014.

        Participated in one Day National Seminar on “ Materials and Manufacturing” sponsored by UGC SAP CAS-I conducted by the Department of Mechanical Engineering, AU college of Engineering, Andhra University, Visakhapatnam on 23^rd March 2017.

    Participated in one Day National Workshop on “ Advances in Mechanical Engineering” sponsored by UGC SAP CAS-I conducted by the Department of Mechanical Engineering, AU college of Engineering, Andhra University, Visakhapatnam on 11^th March 2019.

Santosh Peddinti, P Srinivasa Reddy, P.Thimothy “Noise and Vibration Analysis of Diesel Engine fueled using Diesel and Neem Biodiesel with Inclusion of MoO3 Nano Particles.” International Journal for Research in Applied Science & Engineering Technology (IJRASET), ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538, Volume 11 Issue III Mar 2023- Available at www.ijraset.com

Raja S. Agrawal AP. P Patil P. Thimothy, P. Capangpangan, RY, Singhal, P. Wotango MT. “Optimization of 3D Printing Process Parameters of Polylactic Acid Filament Based on the Mechanical Test” in International Journal of Chemical Engineering Volume 2022, Article ID 5830869, 7 pages https://doi.org/10.1155/2022/5830869. Received 8 April 2022; Revised 16 May 2022; Accepted 28 May 2022; Published 11 August 2022

P.Thimothy, Ch. Ratnam, Siva Sankar Raju, “Assessment of Tribological Performance of AL/CSA Composites Using RSM”, in International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 2018, pp. 442–451, Article ID: IJMET_09_13_046 (Indexed: SCOPUS)

Siva Sankara Raju R, D.Ashok, Thimothy Pandi, “Determination of Stress and Deformations Analysis on LPG Steel Cylinder “. International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622 Vol. 3, Issue 1, January -February 2013, pp.733-737. (Indexed: Index Copernicus, UGC Approved Journal)

 Sekhar, G. Chandra, P. Thimothy, Raviteja Surakasi, Nadeem A. Khan, and Sasan Zahmatkesh. "Graphene Nanopowder and Propylene Glycol Solutions: Thermal and Physical Properties." Arabian Journal for Science and Engineering (2023): 1-12.

 A. Haribabu , Raviteja Surakasi , P.Thimothy , MohammadAmir Khan , Nadeem A. Khan & Sasan Zahmatkesh “Study comparing the tribological behavior of propylene glycol and water dispersed with graphene nanopowder.” Scientifc Reports, Nature Publishing Group UK, February 10, 2023. doi.org/10.1038/s41598-023-29349-7.

 Raju, Sivasankara, Ch. Lakshmi Srinivas, Srinivasa Rao Gunji, T. Srinag, Meda Chandra Shekhar, and Timothy Pandi. “Estimation of Effect of Cold Forging Deformational Behavior on Al-2024 Alloy Reinforced with Fly-Ash Particulates.” Advances in Science and Technology. Trans Tech Publications Ltd, September 26, 2022. https://doi.org/10.4028/p-609250.

  Hari Kiran Vuddagiri , Sivasankara Raju Rallabandi , Srinivas Vadapalli , Thimothy Pandi, “ASSESSMENT OF MECHANICAL AND TRIBOLOGICAL PERFORMANCE OF HYBRID Al/MoS2/Al2O3 COMPOSITE BY GFRA”, in Metallurgical and Materials Engineering Volume 28, Issue 1, April 2022, pp. 79–102, DOI: https://doi.org/10.30544/764

Siva Sankar Raju, P.Thimothy, Ch. Ratnam, “Estimation of physical, mechanical and machinability properties of Al-MMCs reinforced with coconut shell ash particulates”, in Ceramic Sciences and Engineering (2018) doi:10.24294/cse.v1i2.703

 P.Thimothy¹, Ch.Ratnam² and Siva Sankara Raju³ “Development and Accretion of Tribological Performance on Al-CSA Composites using Orthogonal Array”, Ninth International Conference on Materials Processing and Characterization, Elsevier Publishers Materials Today: Proceedings 18 (2019) 5332–5339.

    P.Thimothy¹, Ch.Ratnam² and Siva Sankara Raju³ “Development and Accretion of Tribological Performance on Al-CSA Composites using Orthogonal Array”, Ninth International Conference on Materials Processing and Characterization, Elsevier Publishers Materials Today: Proceedings 18 (2019) 5332–5339.

Number of B.Tech Projects Guided: 22

·        Number of M.Tech Projects Guided: 04

TRAININGS ATTENDED:

• Completed AUTOCAD training with certificate No TSS11-HO-CAD-F024 from 01/06/2011 to 15/07/2011 at TECHNOSOFT Solutions, Visakhapatnam.
• Completed comprehensive training program on CNC Turning and Milling using CNC Lathe & CNC Mill equipment from 05/08/2013 to 09/08/2013 at MTAB, Industrial Estate, Perungudi, Chennai.

GATE Qualified:    GATE 2008 Qualified with percentile score 72.53 and All India Rank 4992. 

 Ratification:    Ratified as Assistant Professor in the Department of Mechanical Engineering by JNTU Kakinada in the year 2016.

Webinars Attended:

• Participated in the webinar conducted by ICT Academy on the topic Future of AI inspired by Customer Use Cases for AI- on 09/04/2020 for the session Technology for future.
• Participated in the webinar conducted by ICT Academy on the topic Robotic Process Automation: Basics and Beyond on 10/04/2020 for the session Technology for future.
• Participated in the webinar conducted by ICT Academy on the topic Accelerating Experiential Learning in Engineering on 13/04/2020 for the session Technology for future.
• Participated in the webinar conducted by ICT Academy on the topic The Future of Making on 14/04/2020 for the session Technology for future.
• Participated in the webinar conducted by ICT Academy on the topic Introduction to AI & ML on 15/04/2020 for the session Technology for future.
• Participated in the webinar conducted by ICT Academy on the topic Cyber security Essentials on 16/04/2020 for the session Technology for future.
• Participated in the webinar conducted by ICT Academy on the topic Design Thinking - Preparing the mind for disruption on 17/04/2020 for the session Technology for future.
• Participated in the webinar conducted by ICT Academy on the topic Digital Transformation in Enterprise on 18/04/2020 for the session Technology for future.
• Participated in the webinar conducted by ICT Academy on the topic Leading in a VUCA World from 20/05/2020 to 24/05/2020 for 5 days.
• Participated in the webinar conducted by ICT Academy on the topic The Future of Education, Employment and Entrepreneurship from 04/05/2020 to 08/05/2020 for 5 days.
• Participated in the webinar conducted by ICT Academy on the topic The Future of skills Education, Employment and Entrepreneurship from 11/05/2020 to 15/05/2020 for 5 days.
• Participated in the webinar conducted by ICT Academy on the topic 5G as an Enabler in Digital Transformation on 18/05/2020 for the session Future Tech 2020.
• Participated in the webinar conducted by ICT Academy on the topic Global Mega Trends, Technologies & Covid 19 Impacting Sectors on 19/05/2020 for the session Future Tech 2020.
• Participated in the webinar conducted by ICT Academy on the topic Building Skills in Robotic Process Automation on 20/05/2020 for the session Future Tech 2020.
• Participated in the webinar conducted by AUDISANKARA GROUP OF INSTITUTIONS, Nellore on the topic University Industry linkage Different Mechanisms on 02/05/2020.
• Participated in the webinar conducted by AUDISANKARA GROUP OF INSTITUTIONS, Nellore on the topic Employability skills in Curriculum Design on 26/04/2020.
• Successfully attended Leadership Talk With Dr. Pramod Chaudhari, Founder, Chairman, Praj Industries Limited and Dr. Abhay Jere, Chief Innovation Officer MHRD Innovation Cell, Saturday, 16th May 2020 at 01.00 PM by MHRD's Innovation Cell.
• Participated in the International Lecture series: 07 instructed by John Patrick Moloney, Director and Founder of Forensic comparison software, Australia on the topic Finger Print Comparison on 17/05/2020.
• Participated in the webinar conducted by SWARNANDHRA COLLEGE OF ENGINEERING AND TECHNOLOGY, NARSAPUR on the topic “Student Centered Learning in Engineering” on 23/05/2020.
• Participated in the webinar conducted by BABA INSTITUTE OF TECHNOLOGY AND SCIENCES, VISAKHAPATNAM on the topic “Research Publications, Process, Credentials and Outcomes” on 09/05/2020.
• Participated in the webinar conducted by MIRACLE EDUCATIONAL SOCIETY GROUP OF INSTITUTIONS, Vizianagaram on the topic “Research Findings-Submission to successful Publication” on 06/05/2020.
• Attended webinar on “Energy Auditing and Career Opportunities” on 12/05/2020 organized by Sri Eswar College of Engineering, Coimbatore.
• Attended webinar on “Data Science for Engineers” on 13/05/2020 organized by Sri Eswar College of Engineering, Coimbatore.
• Attended webinar on “AI & Machine Learning” on 14/05/2020 organized by Sri Eswar College of Engineering, Coimbatore.
• Attended webinar on “Cyber Security” on 15/05/2020 organized by Sri Eswar College of Engineering, Coimbatore.
• Attended webinar on “Demystify the Cloud” on 17/05/2020 organized by Sri Eswar College of Engineering, Coimbatore.
• Attended webinar on “BLOCK CHAIN BASICS” on 18/05/2020 organized by Sri Eswar College of Engineering, Coimbatore.
• Attended webinar on “INDUSTRY 4.O” on 19/05/2020 organized by Sri Eswar College of Engineering, Coimbatore.
• Attended webinar on “FUTURE OF COMMUNICATION ENGINEERING” on 20/05/2020 organized by Sri Eswar College of Engineering, Coimbatore.
• Attended webinar on “EXPANDING SCOPE OF ROBOTICS” on 21/05/2020 organized by Sri Eswar College of Engineering, Coimbatore.
• Attended webinar on “DESIGN THE THINKING” on 22/05/2020 organized by Sri Eswar College of Engineering, Coimbatore.
• Attended webinar on “TECHNOLOGY-THE FUTURE OF RECRUITMENT” on 23/05/2020 organized by Sri Eswar College of Engineering, Coimbatore.