Admission Enquiry Form-2024 Faculty Recruitment :Applications are invited for the post of Professor / Associate Professor / Assistant Professor MANDATORY DISCLOSURE-2024 NIRF-2024 data for Overall NIRF-2024 data for Engineering Colleges NIRF-2024 data for Innovation SoP for students: Viksit Bharat@2047 (Voice of Youth) Information Viksit Bharat@2047 : Visit Website here Viksit Bharat@2047 (Voice of Youth): Upload your selfies with Certificates MANDATORY DISCLOSURE 2023 ARIIA-2023 Report AICTE OBE based Books: E-Kumbh Portal Info NIRF Report - 2023 Click here to Upload Institutional Activities,    

PLACEMENTS - 2023-2024: (607*) Accenture-108, Amazon-2, Hexaware-30, Tech Mahindra -15, OPPO-20, BOSCH-4, TCS-47(223* Members Waiting for Results), Constient-5, Hyundai-2, Cyient-5, Medha Servo-3, Tvarana-8, Prolifics- 2, Big works-4, Invenio-7, POLYCAB-7, VEM Technologies-2, PLINTRON Technologies-2, Grow Control-3, KROLL-3, Aptroid-4, PennantTechnologies-3, Thermal Systems-3, MGH Infrastructures-6, Nueve It Solutions-23, VAYU Group-3, PALTECH-7, JYTRA Technologies-1, Siliconus-8, KEOLIS-11, Quality KioskTechnologies-21, ZEN Technologies-55, Revature -13, Movate-1, MCORE-21, Skillhacc -15, Synnova Gears-2, Eqic Dies&Moulds Engineers-9, Jobiak- 20, Surya Tech Solutions-62, Savantis-52, Intellipat-9 Many More.....

school and education

CET CODE: LIET

Ravikanth Yajjala

Ravikanth Yajjala

Ravikanth Yajjala
Male
08/29/1989
8919435581
I am always energetic and eager to learn new skills.
04/04/2022
Assistant professor
06
LT03072
M.Tech, (Ph.D)
Industrial Metallurgy
Mechanical Engineering
S. No Name of the Course Duration Place
1. AICTE JNTUK 2-week FDP on Recent Advances in Materials & Challenges in Manufacturing Techniques 22nd March-3rd April 2021  Jawaharlal Nehru Technological University, Kakinada.
2. International Pre-conference Workshop on Tribology in India Trib  1st December 2019 Indian Institute of Science, Bangalore.
3. National Workshop on “Mechanical and Tribology Behavior of Advanced composites" 21st – 25th January 2019 National Institute of Technology, Warangal.
4. Faculty Development Programme (FDP) on “Advanced in Materials and Manufacturing Processes”  29th October - 03rd November 2018 Jawaharlal Nehru Technological University, Kakinada.
5. Workshop on “Engineering Failures – Prediction, Prevention and Post Analysis”  13th February 2015 Andhra University, Visakhapatnam.
  1. B. Srinivas, Y. Ravikanth, J Babu Rao. (2022). Effect of Heat Transfer Rate on Different Shapes using Different Moulding Sands on Microstructural and Mechanical Properties of AA2024 by CO2 Process. Design Engineering, (1), 665-680. http://thedesignengineering.com/index.php/DE/article/view/8845.
  2. I. Gopi Lakshmi, Y. Ravi Kanth, I. Narasimha Murthy J. BabuRao, “Microstructure evaluation on micro and nano slag particles reinforced AA7075 composites” Materials Science Forum (ISSN: 1662-9752), vol. 1048, Trans Tech Publications, Ltd., 4 Jan. 2022, pp. 43–53. (Impact factor: 0.55) https://doi.org/10.4028/www.scientific.net/msf.1048.43.
  3. I. Gopi Lakshmi, Y. Ravi Kanth, J. BabuRao, “Influence of micro and nano particles on mechanical behaviour of slag reinforced AA7075 composites” Materials Science Forum (ISSN: 1662-9752), vol. 1048, Trans Tech Publications, Ltd., 4 Jan. 2022, pp. 33–42. (Impact factor: 0.55) https://doi.org/10.4028/www.scientific.net/msf.1048.33.
  4. Y. Ravi Kanth, I. Narasimha Murthy, S. Nagappa, J. Babu Rao, “Influence of mould materials on wear behavior of A356 alloy” Materials Today: Proceedings,2021. Vol. 45, Part 6, 2021, Pages 5177-5182, ISSN 2214-7853. (Elsevier publication) (Impact factor: 1.24) https://doi.org/10.1016/j.matpr.2021.01.696.
  5. B. Srinivas, Y. Ravi Kanth, J. Babu Rao, “A study on non destructive evaluation of AA2024 by using different moulding sands by CO2 casting process” Materials Today: Proceedings,2021. Vol. 45, Part 6, 2021, Pages 5237-5242, ISSN 2214-7853. (Elsevier publication) (Impact factor: 1.24) https://doi.org/10.1016/j.matpr.2021.01.825.
  6. I. Gopi Lakshmi, Y. Ravi Kanth, M. Kumar Raja, NBR Mohan Rao, J. BabuRao, “Dry sliding wear behaviour of micro and nano High Entropy Fe-Cr slag particulates reinforced AA 7075 composites” Materials today proceedings, Vol. 42, Part 2, 2021, Pages 590-599, ISSN 2214- 7853. (Elsevier publication) (Impact factor: 1.24) https://doi.org/10.1016/j.matpr.2020.10.674
  7. Ch. Bharat Kumar, Y. Ravi Kanth, A. Likhita, I. Narasimha Murthy and J. Babu Rao, “Microstructure and Mechanical Properties of Oxide Particulates Reinforced PMCs” Materials today proceedings, Vol. 42, Part 2, 2021, Pages 1230-1238, ISSN 2214-7853. (Elsevier publication) (Impact factor: 1.24) https://doi.org/10.1016/j.matpr.2020.12.873
  8. G.Vara prasad, S. Nagappa, Y. Ravi Kanth, I. Gopi Lakshmi, J. Babu Rao, “Effect of Brachyura Shell Particles on Glass Fibre Reinforced Epoxy Polymer Composite” Materials today proceedings, Vol. 42, Part 2, 2021, Pages 555-562, ISSN 2214-7853.(Elsevier publication) (Impact factor: 1.24) https://doi.org/10.1016/j.matpr.2020.10.521
  9. Yajjala Ravikanth, Inampudi Narasimha Murthy, Jinugu Babu Rao, “Correlation between SDAS and mechanical properties of Al–Si alloy made in Sand and Slag moulds”. J Mater Res Technol. Vol.9. Issue 3 2020, Pages 6257-6267, ISSN 2238-7854, (Elsevier publication) (Impact factor: 5.289) https://doi.org/10.1016/j.jmrt.2020.02.066.
-
  1.  Y. Ravikanth, G. Siva Kumar, I.N. Murthy and J Babu Rao, “Effect of Heat treatment on Cold Workability Limits of Fly Ash Particulate Reinforced AA 2024 Composites” National Conference on Emerging Trends in Mechanical Engineering (ETME - 2019), 9th-10th January,2019, NIT, Warangal, pp.251-256.
  1. J. Manasi Esther, Y. Ravi Kanth, J. Babu Rao, “Development of High Entropy Nano Slag Particulates Reinforced AA7075 Nano Composites” International conference & 75th Annual Technical Meeting of Indian Institute of Metals (NMD ATM), 13-15 November, 2021, Jamshedpur, pp. 209.
  2. J. Manasi Esther, Y. Ravi Kanth, J. Babu Rao, “Corrosion Behaviour of Al-Si alloy made in Sand and Slag Moulds” International conference & 75th Annual Technical Meeting of Indian Institute of Metals (NMD ATM), 13-15 November, 2021, Jamshedpur, pp. 223.
  3. I. Gopi Lakshmi, Y. Ravi Kanth, J. BabuRao, “Influence of micro and nano particles on mechanical behaviour of slag reinforced AA7075 composites” 3rd international conference on Materials science and manufacturing Technology (ICMSMT – 2021), 23-24 April 2021, Coimbatore, Tamil Nadu.
  4. I. Gopi Lakshmi, Y. Ravi Kanth, I. Narasimha Murthy J. BabuRao, “Microstructure evaluation on micro and nano slag particles reinforced AA7075 composites” 3rd international conference on Materials science and manufacturing Technology (ICMSMT – 2021), 23-24 April 2021, Coimbatore, Tamil Nadu. 
  5. Y. Ravi Kanth, I. Narasimha Murthy, S. Nagappa, J. Babu Rao, “Influence of mould materials on wear behavior of A356 alloy” 2nd International Conference on Aspects of Materials Science and Engineering (ICAMSE2021), 5th -6th March 2021, Panjab University, Chandigarh, Punjab.
  6. B. Srinivas, Y.Ravi Kanth, J. Babu Rao, “A study on non destructive evaluation of AA2024 by using different moulding sands by CO2 casting process” 2nd International Conference on Aspects of Materials Science and Engineering (ICAMSE2021), 5th -6th March 2021, Panjab University, Chandigarh, Punjab.
  7. Ch. Bharat Kumar, Y. Ravi Kanth, A. Likhita, I. Narasimha Murthy and J. Babu Rao, “Microstructure and Mechanical Properties of Oxide Particulates Reinforced PMCs” 2nd international conference on Recent advances in materials and manufacturing (ICRAMM – 2020), 20-21 November 2020, velalar college of Engineering & Technology, Erode, Tamil Nadu, Volume-2, pp. 654-663.
  8. I. Gopi Lakshmi, Y. Ravi Kanth, M. Kumar Raja, NBR Mohan Rao, J. BabuRao, “Dry sliding wear behaviour of micro and nano High Entropy Fe-Cr slag particulates reinforced AA 7075 composites” 2nd international conference on Recent advances in materials and manufacturing (ICRAMM – 2020), 20-21 November 2020, velalar college of Engineering & Technology, Erode, Tamil Nadu, Volume-3, pp. 1193-1204.
  9. G.Vara prasad, S. Nagappa, Y. Ravi Kanth, I. Gopi Lakshmi, J. Babu Rao, “Effect of Brachyura Shell Particles on Glass Fibre Reinforced Epoxy Polymer Composite” 2nd international conference on Recent advances in materials and manufacturing (ICRAMM – 2020), 20-21 November 2020, velalar college of Engineering & Technology, Erode, Tamil Nadu, Volume-3, pp. 1227-1237. 
  10. Y. Ravikanth, I. Narasimha Murthy, J. Babu Rao, “Dry sliding wear behavior of al-si alloy castings made in silica sand, iron and ferro alloys slag moulds” 10th International Conference on Industrial Tribology (India Trib - 2019), 1-4 December 2019, IIsc, Bangalore.
  11. Y. Ravikanth, I. Narasimha Murthy, J. Babu Rao, “Iron and Ferro Alloys Slags: Alternative mould materials for Foundry Industry” International Conference on Advances in Process Metallurgy (APM 2019), 4-5July 2019, IIsc, Bangalore, pp. 59. 
Powder Metallurgy Association of India (PMAI)
-
-
-
Powered by Community Builder

Talk to us

08922-241111, 241666