CET CODE: LIET

1.Participated & completed successfully AICTE Training And Learning (ATAL) Academy Online FDP on "Operations Management" from 2020-10-12 to 2020-10-16

2. Participated & completed successfully AICTE Training And Learning (ATAL) Academy Online FDP on " Alternatefuels " from 2021-06-12 to 2021-06-16 at  Gyan Ganga Institute of Technology and Sciences, Jabalpur, Madhya Pradesh.

3. Participated & completed successfully AICTE Training And Learning (ATAL) Academy Online FDP on " Moral values,attitude and work place behaviour " from 2021-07-27 to 2021-07-31 at GL Bajaj Institute of Technology and Management, Greater Noida.

4.   Participated & completed successfully AICTE  Training  And  Learning  (ATAL) Academy Online  FDP  on  "Green Technology  and  Sustainability Engineering" from 2020-12-08 to 2020-12-12 at National Institute of Technology, Raipur.

5. Participated in the Virtual National Work shop on “Sponsored Research Projects-Opportunities, Procedures and Best Practices” 24-25 June 2021conducted by Engineering Staff College of India.

6. Participated and successfully completed AICTE-ISTE approved orientation Program on “Current trends in Industrial Engineering” held during 14.04.2021 to 20.04.2021 organized by   G H Patel College of Engineering and Technology (GCET) is an engineering college in Vallabh Vidyanagar, Gujarat.

7. Successfully completed TEQIP-III sponsored one week online short term course on “Mechanical behavior of advanced Engineering materials” from 22.09.2020 to 26.09.2020 organized by National Institute of Technology, Jaipur.

8. Participated in three day national work shop on “NAAC Accreditation: A step by step process” held during 27.05.2021 to 29.05.2021,  organized by   CR Engineering College,Tirupathi.

9. Participated in AICTE sponsored Two-Week Faculty Development Program on “STRATEGIC METHODS AND TOOLS FOR PRODUCT DEVELOPMENT” Organised by Department of Mechanical Engineering during 22nd to 26th February, 2021 (Phase-I) and 22nd to 26th March, 2021 (Phase-II) at Sagi Rama Krishnam Raju Engineering College (A), Bhimavaram through online mode.

10.Participated in the two day National Work shop on “ The revised accreditation frame work of NAAC-2020: The practice of Quality initiatives by IQAC for the Quality enhancement in HEIs” held on 14.05.2021 and 15.05.2021 organized by   Vignan's Institute of Information Technology(A),  Visakhapatnam,

International Journals

1.    Sridhar,K, Sastry BLN ‘Facility layout design - A Case Study’, Industrial Engg. Journal , Vol. XXVI No. 4 April 1997

2.    Sridhar,K, Sastry BLN “Prioritization of jobs in flexible manufacturing systems with neural network”-IJE Transactions,Vol2 2,no1 Feb’2009.

3.    Sridhar,K, Sastry BLN “Applying Genetic Algorithms to the Optimization of Production Planning in a Real-World Manufacturing Environment”- IJETSE International Journal of Emerging Technologies in Sciences and Engineering, Vol.3, No.2, Jan 2011.

4.    Sridhar,K, Sastry BLN “Multi objective  Batch Manufacturing Scheduling with   Genetic Algorithm” -Global Journal of Researches in Industrial Engg. Vol 12,issue2, Feb’2012

5.    NilmaniSahu,Sridhar.K.“Development of Model for Quality Costing in a Medium Scale Industry-A Case Study”. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) Impact Factor(JCC):  1.46. e-ISSN: 2278-1684, p-ISSN: 2320-334X, Volume 6, Issue 4 (May. - Jun. 2013), PP 19-23.

6.    NilmaniSahu,Sridhar.K “Methodology of Evaluating the Overall Equipment Effectiveness   in a Cylinder Liner Manufacturing Firm through Total Productive Maintenance”.  International Journal of Industrial Engineering and Technology (IJIET); ISSN (Print): 2277-4769; E-ISSN: 2278–9456; Volume:3, Issue :3, Impact Factor(JCC):  4.3729. (Transstellar Journal Publications and Research Consultancy Private Limited).

7.    NilmaniSahu,Sridhar.K "Six sigma Implementation Using DMAIC Approach-A Case Study in a Cylinder Liner Manufacturing Firm”. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD); ISSN (Online): 2249-8001, ISSN: 2249-6890, Vol. 3, Issue 4, Oct 2013, 11-22, Impact Factor (JCC): 5.2189. (Transstellar Journal Publications and Research Consultancy Private Limited).

8.    Sridhar,K, Sastry BLN “Design of multi- objective cellular manufacturing system.” In International Journal of Mechanical Engineering Research And Development (IJMERD), ISSN (Print): 2248- 9347; E-ISSN: 2248 -9355; Impact Factor(JCC):  4.8867;  published by Priyanka Research Journal(PRJ) Publication, Volume 3, Number 2, 2013.

9.    Sridhar,K, Sastry BLN “Experimental design of constraint satisfaction adaptive neural network for generalized job-shop scheduling” In  International journal of industrial engineering Research and development (IJIERD) ISSN 0976 – 6979 (Print); ISSN 0976 – 6987 (Online); Journal Impact Factor (2014): 5.7971 (Calculated by GISI); Published by International Association for Engineering and Management Education, Volume 5, Issue 3, May - June (2014)

10.  C.K.Sao,Sridhar.K.“A Review  on  Six Sigma  methodology  in  manufacturing industries” in  International Journal of Industrial Engineering and Technology (IJIET), ISSN (Print): 2277-4769; E-ISSN:2278–94  Impact Factor(JCC):  4.3857;  published by Transstellar Journal Publications and Research Consultancy Limited (TJPRC),  vol5,issue1, Feb’2015 edition.

11.  Jitendra Sahu,Sridhar.K.“Implementation of Lean Manufacturing Tools in a Machine Shop - A Case study" in International Journal on Advances in Engineering and Management (IJAEM), ISSN : 2249-3858;  vol 2,issue2, Feb’2015 edition.

12.  Satish Verma,Sridhar. K “Cost Analysis for Number of Servers in a Bank using Simulation Method “

SSRG - IJME - Volume 2 Issue 5 - May 2015.E-ISSN:2348-8360

13.  Ritesh,Sridhar.K.“Productivity and Quality improvement through Kanban - a case study"    in International Journal of Advanced Engineering Research and Studies, E-ISSN: 2249–8974; vol 6, issue2, March 2015 edition.

14.  C.K.Sao, Sridhar.K “Critical successful factors for implementation of six sigma in automobile industries: an AHP approach” in International Journal of Mechanical and Production Engineering, ; E-ISSN:  2320-2092, Impact Factor(JCC):  2.56;   Volume- 3, Issue-4, April-2015 edition.

15.  Lokesh Sahu, Sridhar.K “Job Shop Scheduling With Heuristic Algorithms” International Journal of Research and Innovations in Science and Technology Volume 2 : Issue 1 : December 2015.

16.  Sridhar.K “Decision support system for selecting machine centre” Int. Journal of Engineering Research and  Applications, ISSN: 2248-9622,vol.6,issue2, February 2016.

17.  Meghraj, Sridhar.K.“Analysis of causes of Low OEE and Improvement by Implementation of TPM and 5S techniques in Manufacturing industry’ International Journal of Research and Innovations in Science and Technology, Volume 3,Issue 1,2016 ISSN:2394-3858.

18.  Dinesh,SridharK“Operations Decisions for a small Bakery shop with Seasonal Demand” International Journal of Latest Engineering Research and Applications (IJLERA),Volume 01, Issue  03, December2016.

19.  Meghraj, Sridhar.K “Methodology of Evaluating the overall Equipment Effectiveness in Machine Shop through Total Productive Maintenance” International Journal of Research and Innovations in Science and Technology, Volume  3, Issue 01, Dec 2016.

20.  Sridhar.K.“Multi objectives operations decisions by using Goal programming for a small scale enterprise” International Journal of Research in Engineering & Technology, Vol. 4, Issue 8, Nov’ 2016.

21.  Meghraj, Sridhar.K “Implementing Total Productive Maintenance in Machine shop of Manufacturing Industry–A Case Study’  International Journal of Darshan Institute on Engineering Research and Emerging Technology. ,Vol. 5, No. 2, 2016

22.  Sridhar.K.,Prakash T, “The relation between critical successful factors of six sigma and organization performance” International Journal of Mechanical and Production Engineering,March2017.

23.  Raushankumar, Sridhar.K. “ Minimization of makespan in job shop scheduling with heuristic and genetic algorithms”.  (IJDI-ERET),ISSN- 2320-7590.June2018.

24.  Raushankumar, Sridhar.K.  “A Combined Heuristic and Genetic Algorithm Approach to Meeting Due dates in Job Shop Environment” International Journal of Research and Innovations in Science and Technology Volume 6 : Issue 2 : 2018.

25.   NilmaniSahu, Sridhar.K   “Identification of barriers for Quality management  implementation   in automotive sector”  Journal  of Adv Research in Dynamical & Control Systems,  vol11,issue5,June2019.  E-ISSN:1943-023X

26.  Rahul Pandey, K Sridhar “Evaluating the performance of plant by overall equipment

effectiveness & overall resource effectiveness: a case study” International research journal of Engineering and Technology (IRJET), vol6,issue6,June2019.E-ISSN2395-0056

27.NilmaniSahu, Sridhar.K  “Quality Management in Automotive Manufacturing and Service Sector” International Journal of Innovative Technology and Exploring Engineering (IJITEE), ISSN: 2278-3075, Volume-8 Issue-3, June 2019.

 28.Roopesh Kumar Sinha , K. Sridhar " Effect of Nano SiO₂  on Properties of Reinforced Epoxy Hybrid Composite –Elsevier-Science direct-Materials Today: Proceedings.  ISSN: 2214-7853.

29. Roopesh Kumar, Dr. K. Sridhar, Dr. Rajesh Purohit “Manufacturing of Composite Material – A Case Study” IJSRD - International Journal for Scientific Research & Development| Vol. 8, Issue 8, 2020 | ISSN (online): 2321-0613.

 30.ChandraShekhar Nagendra, Dr. Sridhar K, “ Analysis of Strength & Hardness of Weld Specimen of Mild-Steel Square Bars by Varying Arc Length and Voltage using Semi- Automatic Shielded Metal Arc Welding Machine” International Journal of Scientific Research in Engineering and Management (IJSREM) Volume: 04, Issue: 10 Oct -2020, ISSN: 2582-3930

International Conferences:

1.      Sridhar.K. ‘Application of Operations Research techniques in Automobile components manufacturing firm - A Case study’ in the International Conference on Operations Research and Development ICORD-2002 Conducted at Anna University, Chennai. Sponsored by Operational Research Society of India, during 27.12.2002 to 30.12.2002.

2.      Sridhar.K. ‘Expert System Approach for FMS Scheduling Under Random Environment With Artificial Neural Network’   in the International Conference on Operations Research – Emerging paradigms  (APORS-2003) being organized by ORSI at IIT Delhi during December  8-12, 2003.

3.      Sridhar.K. ‘Productivity Study and Analysis in Municipal Corporation ‘ in the 11^th  International  Conference  on  Productivity  and Quality Research (ICPQR 2005) organized during December  12-15, 2005 at IIT Delhi, in association with International Society on Productivity and Quality Research (ISPQR).

4.      Sridhar.K. ‘Comparison of dispatching rules in Job-shop Scheduling problem using simulation: a case study‘  in the International Conference (NCIITM 2006) organized by Department of Mechanical Engg. , Kumara guru College of Technology, Coimbatore, during June 20-23,2006.

5.      Sridhar.K ‘Development of Simulation Based intelligent decision support system for the adaptive real time control of Flexible Manufacturing Systems’ in the International Conference on Factory Automation, Robotics & Soft Computing FARSC-2007 organized during 18^th to 19^th January 2007 at National Institute of Technology, Warangal.

6.      Sridhar.K ‘Total Quality Management –A Competitive Strategy for Manufacturing -A Case Study ‘in the First International & 22^nd All India Manufacturing Technology Design & Research Conference (AIMTDR) organized during December 21-23, 2007 at IIT Roorkee.

7.      Sridhar.K ‘A Multi Objective cellular Manufacturing Problem‘ in the First International & 22^nd All India Manufacturing Technology Design & Research Conference (AIMTDR) organized during December 21-23, 2007 at IIT Roorkee.

8.      Sridhar.K “Optimal machine  scheduling to minimize the penality costs” Proc. Of International Conference on Intelligent Systems and Control , ISCO 2006, Karpagam College of Engg,Coimbatore, during 9-11 Aug.2006, pp.333-347.

9.      Sridhar.K “JIT based Quality Management in Indian Context” Proc. of 22nd International Conference on CAD/CAM Robotics and Factories of the future, VIT,Vellore, held during19-22nd July,2006,pp.933-937.

10.  Sridhar.K “Multi Objective cellular Manufacturing Problem”  at the  International Conference on Emerging trends in Mechanical Engineering (ICETME-2013) during 4^th and 5^th January 2013 organised by Department  of  Mechanical Engineering, G.H.Patel College of Engineering & Technology(A Charutar Vidya Mandal Institution), Anand, Gujarat.

11.  Roopesh Kumar, Sridhar.K " Effect of Nano SiO₂  on Properties of Reinforced Epoxy Hybrid Composite –ELSEVIER-SCIENCE DIRECT[Materials Today: Proceedings.] International conference on Material Processing and characterization 21-23 Feb’2020.IIM-Mathura chapter.

12.  Roopesh Kumar, Sridhar.K " "Development of Automotive Application With The Help of Natural Fiber CompositeComposite –ELSEVIER-SCIENCE DIRECT[Materials Today: Proceedings.] International Conference on Advances in Mechanical Engineering and Nano Technology (ICAMEN) 2020 held at Manipal University Jaipur, India during February 28-29, 2020

  National Conferences :

1.      Sridhar.K ‘ Artificial Neural network approach for FMS scheduling under random environment‘ in the National Conference on Industrial Automation and Applications organized  by Association for Machines and Mechanisms at Priyadarsini college of Engineering and Architecture, Nagpur, during 19^th-20^th Jan’ 3-4, 2001.

2.      Sridhar,K, Sastry BLN ‘Application of Liner of Balance Scheduling Technique for Project Production system‘ in the National Conference on Recent Advances in Computer Aided Engineering (RACE 2006 )  organized  by Department of Mechanical Engg. , University College of Engineering (Autonomous), Osmania University, Hyderabad during March 3-4, 2006.

3.      Sridhar.K.Prakash.L.T. “An approach for object finding using mobile Robots based on ACO” at XXIII National Convention of Mechanical Engineers and National Conference  on “Emerging Trends in Manufacturing Systems And Technologies” organized by Institution of Engineers, India at Hyderabad from 10th to 12th September, 2007.

4.      NilmaniSahu,Sridhar.K “Quality  Improvement  Using  Statistical Process Control  A Case study  in a cylinder liner manufacturing  unit”   at the  National Conference on Emerging trends in Mechanical Engineering [ETME-2012] during 29^th and  30^th  November 2012,  organized by  Department  of  Mechanical Engineering, Technocrats Institute of  Technology(Excellence),Bhopal.

5.      RKOjha,,Sridhar.K “Design of a stand alone Photovoltaic system for a Rural hospital” at the  National Conference on Emerging trends in Mechanical Engineering [ETME-2012] during 29^th and 30^th November 2012, organized by Department of Mechanical Engineering, Technocrats Institute of  Technology(Excellence),Bhopal.

6.      NilmaniSahu,Sridhar.K “Critical successful factors to implement SixSigma in a manufacturing Industry” in the National Conference on Global innovations(AICON2013) organized  by CSIT,Durg during April 12-13,2013.

7.      Sridhar.K “Dynamic Job shop scheduling problem with an expert system” in the National Conference on Global innovations(AICON2013) organized  by CSIT,Durg during April 12-13,2013.

8.      Sridhar.K “Simulation  based modelling for Real time scheduling  in a Flexible Manufacturing System” in the National Conference on Intelligent systems(AICON2014) organized  by CSIT,Durg during April 25-26, 2014.

9.      Ritesh,,Sridhar.K “Implementation Of Just In Time Production Through Kanban System.” in the National Conference on Intelligent systems(AICON2014) organized  by CSIT,Durg during April 25-26, 2014.

10.  Sridhar.K “Implementing Lean Manufacturing Concept To Improve Productivity Of Crusher Hammer Manufacturing “in the National Conference on Intelligent systems(AICON2014) organized  by CSIT,Durg during April 25-26, 2014.

11.  Sridhar.K “Six Sigma Implementation Framework For Manufacturing Industries. “in the National Conference on Intelligent systems(AICON2014) organized  by CSIT,Durg during April 25-26, 2014.

12.  Sridhar.K “Aggregate Production Planning For A Manufacturing Unit With Variations In Demand. “in the National Conference on Intelligent systems(AICON2014) organized  by CSIT,Durg during April 25-26, 2014.

13.  Sridhar.K “Implementation Of TQM In The Small scale Sector. “in the National Conference on Intelligent systems(AICON2014) organized  by CSIT,Durg during April 25-26, 2014.

14.  Sridhar.K “Six Sigma and Lean concept In a Cylinder Liner Manufacturing Firm-A Case Study. “in the National Conference on Intelligent systems(AICON2014) organized  by CSIT,Durg during April 25-26, 2014.

15.  Sridhar.K “A Survey related to Six Sigma Implementation in Indian Automotive Components Manufacturing Sector”  in the All India Conference on “Sustainable Product Development in Mechanical Engineering April 24th -25th, 2015.

16.  Sridhar.K “Evaluation of performance of diesel engine with biodiesel” in the  All India Conference on ‘Clean and green technology’ in Mechanical Engineering, April22^nd -23^rd, 2016

17.   Sridhar.K  “ Job   Shop scheduling with heuristic methods and expert system” in the  All India Conference on Digital Engineering, 21^st -22^nd  April, 2017.

18.  Sridhar.K “Simulation of optimal number of maintenance supervisors” in the  All India Conference on “Disruptive Technologies”, 20^th -21^st  April, 2018.

19.  Amir Khan, Sridhar.K “Application of total quality management techniques in a foundry shop” in the  All India Conference on “Disruptive Technologies”, 20^th -21^st  April, 2018.

20.  Sridhar.K “Scheduling in make to order environment using BPANN model” in the  All India Conference on “New age skills ”, 19^tt -20^th  April, 2019.

1.     Sridhar.K. ‘Application of Operations Research techniques in Automobile components manufacturing firm - A Case study’ in the International Conference on Operations Research and Development ICORD-2002 Conducted at Anna University, Chennai. Sponsored by Operational Research Society of India, during 27.12.2002 to 30.12.2002.

2.     Sridhar.K. ‘Expert System Approach for FMS Scheduling Under Random Environment With Artificial Neural Network’   in the International Conference on Operations Research – Emerging paradigms  (APORS-2003) being organized by ORSI at IIT Delhi during December  8-12, 2003.

3.     Sridhar.K. ‘Productivity Study and Analysis in Municipal Corporation ‘ in the 11^th  International  Conference  on  Productivity  and Quality Research (ICPQR 2005) organized during December  12-15, 2005 at IIT Delhi, in association with International Society on Productivity and Quality Research (ISPQR).

4.     Sridhar.K. ‘Comparison of dispatching rules in Job-shop Scheduling problem using simulation: a case study‘  in the International Conference (NCIITM 2006) organized by Department of Mechanical Engg. , Kumara guru College of Technology, Coimbatore, during June 20-23,2006.

5.     Sridhar.K ‘Development of Simulation Based intelligent decision support system for the adaptive real time control of Flexible Manufacturing Systems’ in the International Conference on Factory Automation, Robotics & Soft Computing FARSC-2007 organized during 18^th to 19^th January 2007 at National Institute of Technology, Warangal.

6.     Sridhar.K ‘Total Quality Management –A Competitive Strategy for Manufacturing -A Case Study ‘in the First International & 22^nd All India Manufacturing Technology Design & Research Conference (AIMTDR) organized during December 21-23, 2007 at IIT Roorkee.

7.     Sridhar.K ‘A Multi Objective cellular Manufacturing Problem‘ in the First International & 22^nd All India Manufacturing Technology Design & Research Conference (AIMTDR) organized during December 21-23, 2007 at IIT Roorkee.

8.     Sridhar.K “Optimal machine  scheduling to minimize the penality costs” Proc. Of International Conference on Intelligent Systems and Control , ISCO 2006, Karpagam College of Engg,Coimbatore, during 9-11 Aug.2006, pp.333-347.

9.     Sridhar.K “JIT based Quality Management in Indian Context” Proc. of 22nd International Conference on CAD/CAM Robotics and Factories of the future, VIT,Vellore, held during19-22nd July,2006,pp.933-937.

10.  Sridhar.K “Multi Objective cellular Manufacturing Problem”  at the  International Conference on Emerging trends in Mechanical Engineering (ICETME-2013) during 4^th and 5^th January 2013 organised by Department  of  Mechanical Engineering, G.H.Patel College of Engineering & Technology(A Charutar Vidya Mandal Institution), Anand, Gujarat.

11.  Roopesh Kumar, Sridhar.K " Effect of Nano SiO₂  on Properties of Reinforced Epoxy Hybrid Composite –ELSEVIER-SCIENCE DIRECT[Materials Today: Proceedings.] International conference on Material Processing and characterization 21-23 Feb’2020.IIM-Mathura chapter.

12.  Roopesh Kumar, Sridhar.K " "Development of Automotive Application With The Help of Natural Fiber CompositeComposite –ELSEVIER-SCIENCE DIRECT[Materials Today: Proceedings.] International Conference on Advances in Mechanical Engineering and Nano Technology (ICAMEN) 2020 held at Manipal University Jaipur, India during February 28-29, 2020

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

PROJECTS

Number of  M.Tech. Projects guided: 20

Number  of  B.Tech. Projects guided: 40

AWARD

Appreciation certificate received from Govt. of Andhra Pradesh for consultancy Project performed on the aspects of Productivity Study and analysis in Municipal Corporation during the year 2002.

Award from AP state Govt.